Cisco Catalyst 3550 Aan de slag handleiding - Pagina 16
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Catalyst 3550. Cisco Catalyst 3550 33 pagina's. Cisco catalyst 3550: supplementary guide
Ook voor Cisco Catalyst 3550: Product Bulletin (3 pagina's), Product Bulletin (5 pagina's), Gegevensblad (21 pagina's)
Pagina afdrukken
Connect to 100BASE-FX Ports
Follow these steps:
Remove the dust plugs from the
Step 1
100BASE-FX ports and the rubber
caps from the MT-RJ patch cable.
Store them for future use.
Insert an appropriate cable into a 100BASE-FX port. Insert the other cable end into an SC
Step 2
or ST port on the other device.
Install and Connect to GBIC Module Ports
Follow these steps:
Grasp the module on the sides, and
Step 1
insert it into the switch slot until you
feel the connector snap into place.
Insert an appropriate cable into the
Step 2
module port. Insert the other cable end
into the other device.
For a list of supported modules, refer to the release notes on Cisco.com. For detailed instructions on
installing and removing modules, refer to the documentation that came with the GBIC module.
16
SY ST EM
R PS
ST AT U S
M O D E
U TI L
D U PL X
SP EE D
100BASE-FX ports
2
3
4
5
6
7
8
9
10
11
12
GBIC module
2
3
4
5
6
7
8
9
10
11
12
GBIC module port