Cisco Catalyst 3560 Aan de slag handleiding - Pagina 14
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco Catalyst 3560. Cisco Catalyst 3560 20 pagina's. Compact switches
Ook voor Cisco Catalyst 3560: Aan de slag handleiding (37 pagina's), Product Bulletin (3 pagina's), Product Bulletin (5 pagina's), Brochure (17 pagina's)
Pagina afdrukken
Mounting the Switch with a Magnet (Catalyst 3560 8- and 12-Port Switches)
According to safety regulations, when you mount the switch with a magnet, make sure its front panel faces down to prevent
airflow restriction and to provide easier access to the cables. This requires that you mount the switch with a magnet only on a
vertical magnetic surface such as a metal filing cabinet.
1. Position the mounting magnet on the mounting surface.
2. Place the bottom of the switch on the magnet.
3
Metal mounting surface
1
Mounting magnet
2
6
Securing the AC Power Cord (Catalyst 3560 8- and 12-Port Switches)
The AC power-cord retainer is an optional part (PWR-CLIP-CMP).
Insert the power-cord retainer wire into the slot on the
Step 1
plastic holder.
Attach the plastic holder onto the switch rear panel with
Step 2
the supplied screw.
14
1
Switch front panel
3
2