FIBARO FGMS-001 Bedieningshandleiding - Pagina 16
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} FIBARO FGMS-001. FIBARO FGMS-001 20 pagina's. Motion sensor
Ook voor FIBARO FGMS-001: Bedieningshandleiding (2 pagina's), Bedieningshandleiding (11 pagina's)
Pagina afdrukken
16
i
NOTE
Flashlight
Mode
-
visual indicator glows
in white for 10 sec-
onds. If value of pa-
rameter 80 is set to 11,
each detected motion
extends the glowing
by next 10 seconds.
!
CAUTION
The value of parame-
ter 83 must be higher
than the value of pa-
rameter 82.
ADvAnCED PARAMETERS
66. Temperature offset
The value to be added to the actual temperature, measured by the
sensor (temperature compensation).
Available settings: -1000 - 1000 (-100 - 100°C, 0.1°C step)
Default setting:
80. Visual LED indicator - signalling mode
This parameter determines the way in which visual indicator behaves
after motion has been detected.
Available settings: 0 - LED inactive,
Default setting:
81. Visual LED indicator - brightness
This parameter determines the brightness of the visual LED indicator
when indicating motion.
Available settings: 0 - brightness determined by the illuminance
Default setting:
82. Visual LED indicator - illuminance for low indicator brightness
Light intensity level below which brightness of visual indicator is set
to 1%.
Available settings: 0 to value of parameter 83 (in lux)
Default setting:
0 (0°C)
Parameter size:
values from 1 to 9 - single long blink at the mo-
ment of reporting motion. no other motion will
be indicated until alarm is cancelled.
1
-
colour
is
2 - Flashlight Mode, 3 - white, 4 - red, 5 - green,
6 - blue, 7 - yellow, 8 - cyan, 9 - magenta
values from 10 to 18 - single long blink at the
moment of reporting motion and one short
blink each time the motion is detected again.
10 - colour is temperature dependent,
11 - Flashlight Mode, 12 - white, 13 - red,
14 - green, 15 - blue, 16 - yellow, 17 - cyan,
18 - magenta
values from 19 to 26 - single long blink at the
moment of reporting motion and two short
blinks each time the motion is detected again.
19 - colour is temperature dependent,
20 - white, 21 - red, 22 - green, 23 - blue,
24 - yellow, 25 - cyan, 26 - magenta
10
Parameter size:
(parameters 82 and 83)
1-100 (1-100%)
50 (50%)
Parameter size:
100
Parameter size:
2 [bytes]
temperature
dependent,
1 [byte]
1 [byte]
2 [bytes]