DigiSpec DTT-PRO Bedieningshandleidingen - Pagina 6

Blader online of download pdf Bedieningshandleidingen voor {categorie_naam} DigiSpec DTT-PRO. DigiSpec DTT-PRO 16 pagina's. Digital date / time titler

Pagina afdrukken

PROGRAMMING

OPERATING MODE

The DTT-Pro single-channel Date-Time-Titler overlays date, time and title onto a video image, identifying precisely when

and where an event has taken place. The output signal may be displayed on a monitor, recorded on a VCR, DVR or

printed on a video printer.

Press "UP" or "Down" button to move up or down the Title and Date-Time display that overlays on the screen.

Press "Select" button for going to the Programming mode

NOTE :

PROGRAMMING MODE

The DTT-Pro is programmed by pressing the "Select" button while in operating mode then the "MAIN MENU" will appear

and the Setup indicator (Yellow LED) will light. Press the "UP" or "Down" buttons to move the cursor up or down and

press the "Select" button to select the current line item.

TITLER SETUP

Move the cursor by pressing the "UP" or "Down" button to the "TITLER SETUP" and press the"Select" button . The

"TITLER SETUP" menu will apprear and the first character will flash and

the "Up" or "Down" button to scroll through the available characters. When the desired character is displayed select it by

press the "Select" button. This will set the selected character and move the cursor to the next character to the right.

Press the "Select" button and the cursor will sequence through all 20 positions and then exit the "TITLE SETUP" and go

back to the "MAIN MENU" by pressing the "Select" button from the end of the sequence.

DTT AVE

JAN-01-08 8:00:00 A

Title and Date-Time can setting ON or OFF .Please refer to page 10.

MAIN MENU

TITLER SETUP

TIME - DATE

DISPLAY

EXIT

DTT-Pro (DATE/TIME TITLER)

NTSC

a space character is displayed as a block.

Press