Sharp Carousel R-350YS Servicehandleiding - Pagina 9

Blader online of download pdf Servicehandleiding voor {categorie_naam} Sharp Carousel R-350YS. Sharp Carousel R-350YS 40 pagina's. Microwave oven

1. Cooking Sequence.

1. 1.Operate the oven in sensor cooking mode by referring to the

operation manual.

NOTE: The oven should not be operated on SENSOR immediately

after plugging in the unit. Wait two minutes before cooking on

SENSOR.

2. The coil of shut-off relay (RY-1) is energized, the turntable motor,

oven lamp and cooling fan motor are turned on, but the inverter unit

is not turned on.

3. After about 16 seconds, the cook relay (RY-2) is energized. The

inverter unit is turned on, microwave energy is produced and first

stage is started. The 16 seconds is the cooling time required to

remove any vapor from the oven cavity and sensor.

NOTE: During this first stage, do not open the door or touch STOP/

CLEAR pad.

4. When the sensor detects the vapor emitted from the food, the dis-

play switches over to the remaining cooking time and the timer

counts down to zero. At this time, the door may be opened to stir,

turn, or season food.

5. When the timer reaches zero, an audible signal sounds. The shut-

off relay and cook relay are de-energized and the inverter unit,

oven lamp, etc. are turned off.

6. Opening the door or touching the STOP/CLEAR pad, the time of

day will reappear on the display and the oven will revert to an OFF

condition. The fan motor will operate for one minute after cooking.

[4] POWER OUTPUT REDUCTION

1. In 100%, 90%, 80% and 70% power levels, output power will grad-

ually be reduced to avoid overheating.

1-1. For an example of 100% power

After 3 minutes, the output power will be reduced to 70%

gradually.

1-2. For an example of 70% power

After 15 minutes, the output power will be reduced to 60%.

2. In 60% power level, after 30 minutes, the inverter unit will operate

intermittently.

5 – 2

R-350Y(S)