Crestron UC-M50-Z Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Crestron UC-M50-Z. Crestron UC-M50-Z 9 pagina's. Flex tabletop medium room video conference system for zoom rooms software
Ook voor Crestron UC-M50-Z: Snelstarthandleiding (12 pagina's)

Pagina afdrukken

UC-M50-Z

Crestron Flex Tabletop Medium Room Video Conference System for Zoom Rooms™ Software

Mount Devices

Mount the UC Bracket Assembly

Mount the UC Bracket Assembly to VESA® compliant display devices, a

wall, or other building structure. Anchors and screws are supplied for

installation on walls 3/8 in. (9.5 mm) to 3/4 in. (19 mm) thickness.

CAUTION: Preinstalled screws may protrude from the back of the

UC Bracket Assembly. Exercise caution when handling the UC

Bracket Assembly to avoid scratching or damaging surfaces.

NOTE: The integrated cable tie wraps are reusable. Avoid damaging

the cable tie wraps.

Mount the Camera

Mount the included camera according to the

(Doc. 8257).

UC-CAM-WMK Quick Start

Install the Cable Retention Plate

The included cable retention plate provides tie-down points for cables

that connect to the Crestron® conference device.

Remove the adhesive backing from the cable retention plate and install

the plate on the underside of the conference device as shown in the

following diagram. Ensure the cable retention plate is firmly attached

before securing cables.

CAUTION: When turning over the device, place the device on a soft

surface to avoid damage.

NOTE: If a swivel mount kit (CCS-UCA-SMK) is to be used, use the

cable retention bracket included with the swivel mount kit as

described in the

CCS-UCA-SMK DO Guide

Quick Start

(Doc. 7882).