Sharp Aquos Bedieningshandleiding - Pagina 32

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp Aquos. Sharp Aquos 41 pagina's. Led backlight tv / monitor
Ook voor Sharp Aquos: Gebruikershandleiding (30 pagina's), Bedieningshandleiding (35 pagina's), Bedieningshandleiding (37 pagina's)

Pagina afdrukken

Using LINK Operation

Controlling HDMI Equipment Using LINK Operation

What's LINK Operation?

Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK

Operation you can interactively operate compatible system equipment

(Blu-ray disc equipment, AV amplifier, DVD).

One Touch Play

While the TV is in standby mode, it automatically turns on and plays back the

image from the HDMI source.

Single remote control

The LINK Operation automatically recognises the connected HDMI device

and you can control the TV and the devices as if using a universal remote

control.

Control the LINK-compatible audio system

Set the volume of LINK-compatible audio system.

NOTE

Video noise may occur depending on the type of HDMI cable used. Make

sure to use an HDMI-certified cable.

Up to 3 pieces of HDMI recording equipment and one AV amplifier can be

connected using this system.

If the equipment does not operate, turn on the equipment and select the

appropriate input source using

The LINK feature may not operate properly when an HDMI splitter or AV

selector unit is used. These devices may cause interruptions to the image

and/or sound.

(HOME).

EN 7-1