Sharp Aquos LC-19SB280UT Bedieningshandleiding - Pagina 17
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp Aquos LC-19SB280UT. Sharp Aquos LC-19SB280UT 36 pagina's. Liquid crystal television
Ook voor Sharp Aquos LC-19SB280UT: Bedieningshandleiding (31 pagina's)
Pagina afdrukken
Connecting to External Equipment
Connecting. an Audio Amplifier
• When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO OUTPUT (Coaxial) terminal.
Rear of the TV
Bmm
• Digital Audio output is not available when using an HDMllnput.
COllnecting an AV Amplifier
Rear of the TV
Coaxial cable
HDMI-certified cable
BmD
• If the image is not in sync with the audio, check the settings of the connected surround system.
• Letting the TV output the audio to an AV amplifier, you need to connect a coaxial cable.
Connecting. a 'C
• When using HOMI cable (INPUT 3):
BmD
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the INPUT 3
® _
16
(HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set "HDMI Audio" to "DW. (See page 26.)
• The HDMlterminals only support digital signal.