Sharp AQUOS LC-20B10N Bedieningshandleiding - Pagina 13
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp AQUOS LC-20B10N. Sharp AQUOS LC-20B10N 29 pagina's. Lcd colour television
Pagina afdrukken
Preset
On-Screen Display Language Selection
MENU on the LCD TV set can also be used to select the
language.
Upper control panel
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
PRESET mode screen.
2
Press MENU (PRESET-1) twice to display the
LANGUAGE select mode screen.
• Press MENU (PRESET-1) again to change the PRESET
mode as shown below.
AUTO
MANUAL
NOTE
• You can also set the language by selecting "LANGUAGE" in
"SETUP" in the Menu screen. (See page 20.)
3
Press CH (
)/(
display.
4
Press TV/VIDEO to return to the normal screen.
12
3
1, 2 4
LANGUAGE
NORMAL SCREEN
) to select the language you wish to
Presetting the Channels (AUTO)
Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
2
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Sound System
NOTE
• When starting PRESET after setting "SOUND SYSTEM" with
MENU on the remote control, "SOUND SYSTEM" for all
channels are stored into memory.
2
Press VOL (–)/(+) (PRESET-2) on the upper part of
the LCD TV set. All the TV stations in your area that
can be received by the LCD TV set are automatically
preset.
3
The screen shows whatever is on channel 1 when full
auto channel preset is fi nished.
NOTE
• Unused channels are automatically skipped.
• The Preset mode is only available in the TV mode.
• Instead of pressing MENU for more than 2 seconds, you can set
the channel by selecting "CH SETUP" in "SETUP" in the Menu
screen. (See page 14.)
1