Sharp AQUOS LC-26P50E Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp AQUOS LC-26P50E. Sharp AQUOS LC-26P50E 21 pagina's. Lcd colour television

Pagina afdrukken

Menu operations

Power Control menu

[ Power Control ]

Audio

No Signal Off

No Operation Off

No Signal Off

Menu Operation: A (page 9)

When set to "Enable", the power will automatically shut

down if no signal inputs for 15 minutes.

• Five minutes before the power shuts down, remaining time

displays every minute.

NOTE

• When a TV programme finishes, this function may not

operate.

No Operation Off

Menu Operation: A (page 9)

When set to "Enable", the power will automatically shut

down if there is no operation for 3 hours.

• Five minutes before the power shuts down, remaining time

displays every minute.

Setup menu

[ Setup ]

Setup

Auto Installation

Programme Setup

Child Lock

Position

WSS

4:3 Mode

[Panorama]

Rotate

Language

Auto Installation

You can run Auto Installation again, even after setting

up the preset channels.

Press MENU and the MENU screen displays.

Press c/d to select "Setup".

Press a/b to select "Auto Installation", and then

press OK.

If you already set the PIN, enter it here.

• See page 14 for setting PIN.

Press c/d to select "Yes", and then press OK.

LC-26P50E_GB_b

Power Control

[Disable]

Option

[On]

[Normal]

[English]

You can set language and country the same as in

the initial auto installation. Follow steps 1 and 2

on page 8. After this setting, auto search starts

with the following order.

1 Programme auto search

2 Auto labelling

3 Auto sorting

4 Preset download

You do not need to do anything during the auto

search.

Programme Setup

You can run the Auto Installation procedure again at

any time, by accessing the Setup menu, then

Programme Setup. Channels can be tuned

automatically or manually.

Press MENU and the MENU screen displays.

Press c/d to select "Setup".

Press a/b to select "Programme Setup", and

then press OK.

If you already set the PIN, enter it here.

• See page 14 for setting PIN.

Press a/b to select "Auto Search", "Manual

Adjust", "Sort" or "Erase Programme", and then

press OK.

Auto Search

Manual Adjust

Sort

Erase Programme

Auto Search

You can automatically search for and download TV

channels by performing the procedure below. This is

the same function as from programme auto search to

preset download in Auto Installation.

Repeat steps 1 to 4 in Programme Setup.