Sharp Aquos LC-32A47E Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp Aquos LC-32A47E. Sharp Aquos LC-32A47E 20 pagina's. Aquos lcd colour television

Pagina afdrukken

Menu operations

Input Label

You can label each input source with a custom

description.

Press b to select the desired input

source.

Go to "MENU" > "Setup" > "Input

Label".

Press a/b/c/d to select each

character of the new name for the

input source, and then press OK.

Repeat step 3 until the label is fully

spelt out, and then press OK.

•

The label can be six characters or less.

•

If a label name is less than six characters, select

"END", then press OK.

NOTE

•

You cannot change the label if the input source is "TV".

Position

For adjusting a picture's horizontal and vertical position.

Item

H-Pos.: Centres the image by moving it to the left

or right.

V-Pos.: Centres the image by moving it up or down.

NOTE

•

Adjustments are stored separately for each input source.

•

Depending on the input signal type, a position setting may not

be available.

WSS (Wide Screen Signalling)

The "WSS" allows the TV to switch automatically among

the different picture size.

NOTE

•

Use "WIDE MODE" if an image does not switch to the

appropriate picture size. When the broadcast signal contains no

"WSS" information, the function will not work even if enabled.

4:3 Mode

The "WSS" signal has 4:3 auto-switching that allows you

to select between "Normal" and "Panorama".

Item

Normal: Normal range keeping 4:3 or 16:9 aspect

ratio.

Panorama: Wide image without side bars.

WSS signal 4:3 screen

4:3 mode

"Normal"

4:3 mode

"Panorama"

HDMI Setup

HDMI (High-Definition Multimedia Interface) terminal

selection.

To watch an HDMI equipment image,

select "EXT1" or "EXT2" (the terminal

which you are using) from "INPUT

SOURCE" menu using b on the

remote control unit or TV.

Go to "MENU" > "Setup" > "HDMI

Setup".

•

"HDMI Setup" is displayed only when "EXT1" or "EXT2"

is selected from the "INPUT SOURCE" menu.

Press a/b to select the desired item,

and then press OK.

Press a/b/c/d to select the desired

setting, and then press OK.

HDMI

Selectable

Setup

items

Signal Type*

RGB/

YCbCr 4:4:4/

YCbCr 4:2:2

Colour

ITU601/

Matrix*

ITU709

Dynamic

Normal/

Range*

Enhanced

Auto View

Disable/Enable

Audio

Digital/

Select**

Analogue

NOTE

•

Refer to your external equipment operation manual for the

signal type.

Items marked * may be greyed out (with 4) depending on the

•

type of signal input from the external equipment.

•

Item marked ** is only available when "EXT1" is selected.

•

When "Analogue" is selected in "Audio Select" in the "HDMI

Setup" menu, an audio signal from a PC cannot be received.

Fine Sync.

Ordinarily, the TV automatically adjusts image positions

coming from PC ("Auto Sync." function). In some cases,

however, manual adjustment is needed to optimise the

image.

Item

H-Pos.: Centres the image by moving it to the left

or right.

V-Pos.: Centres the image by moving it up or down.

Clock: Adjusts when the image flickers with vertical

stripes.

Phase: Adjusts when characters have low contrast

or when the image flickers.

NOTE

•

If you need to adjust the image position, adjust the position

using your PC.

Description

Select the video signal type from the

HDMI terminal.

Select the internal colour space

conversion method when an RGB

signal is input.

Select the signal amplitude range.

Usually, select "Normal".

Set whether or not to use "WIDE

MODE" based on signal recognition,

including an HDMI signal.

Select "Digital" for audio signal via the

HDMI terminal. Select "Analogue" for

audio signal via the AUDIO jack.