Sharp Aquos LC-32AX3X Bedieningshandleiding - Pagina 11
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp Aquos LC-32AX3X. Sharp Aquos LC-32AX3X 50 pagina's. Lcd colour television
Pagina afdrukken
Preparation
Setting the TV on the wall
• You can mount the TV on the wall, using the optional AN-37AG2 bracket for LC-32AX3X/LC-37AX3X.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
<Example>
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Removing the stand
For wall mounting with the optional bracket, remove the stand.
Before attaching/detaching stand
• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.
• Remove all terminal covers and connected cables.
• Lay the TV down on cushioning (such as a blanket) over a table.
• Make sure two or more people perform the operation.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
1
Unfasten the two screws used
to secure the cover in place.
NOTE
• To attach the stand, perform the above steps in reverse order.
10
Regarding the angle when mounting the TV
on the wall
• The maximum angle to which you can tilt the
wall-mounted TV is as follows. Do not tilt it
more than the maximum angle.
LC-32AX3X
LC-37AX3X
• Tilt the wall-mounted TV slowly when adjusting
its angle.
2
Unfasten the four screws used
to secure the stand in place.
Up to 10°
Up to 5°
3
Detach the stand from the TV.
(Hold the stand so it will not
drop from the edge of the base
area.)