Fiber Tronix FT-FRXID-RM-SCAPC Bedieningshandleiding - Pagina 2

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Fiber Tronix FT-FRXID-RM-SCAPC. Fiber Tronix FT-FRXID-RM-SCAPC 5 pagina's. Indoor fiber optic receiver

Pagina afdrukken

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions.

This symbol is intended to alert the user to the presence of "dangerous voltage" within

the product's enclosure that may be of sufficient magnitude to constitute a risk of

electrical shock.

CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this unit. No

CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than specified

CAUTION: To prevent electric shocks and risk of fire hazards, do not expose this equipment to

CAUTION: Pay attention to NEC articles 810-21, 820-22, and 820-40 that provide guidelines for

CAUTION: This unit may emit harmful invisible laser radiation. Do not view directly any laser

optical emissions. Viewing the laser with certain optical instruments such as a microscope of

magnifier may pose an eye hazard. The laser is classified as a Class 1M per IEC/EN

60825-1/A2:2001 and complies with FDA/CDRH, 21 CFR 1040.10 and 1040.11 except for

deviations pursuant to Laser Notice No.50 dated 26 July, 2001.

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.

Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is

clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged or

defective please contact your distributor or Fibertronix at 1-610-429-1511 for assistance.

INSTALLATION AND OPERATION

user serviceable parts are inside.

power source.

rain or moisture.

proper grounding.