DIGISYNTHETIC DS202 Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DIGISYNTHETIC DS202. DIGISYNTHETIC DS202 9 pagina's. 24-bit digital dynamic compressor/expander
Pagina afdrukken2. REAR PANEL
5
OUT
(1) INPUT LEVEL ADJUSTER: From -20dB ~ +4dB
(2) ANALOG INPUT: XLR or TRS input socket, Parallel between XLR & TRS input. Balance & Unbalance
configuration.
(3) ANALOG OUTPUT: XLR or TRS output socket, Parallel between XLR & TRS input. Balance & Unbal
-ance configuration.
(4) MIDI OUT/THROUGH/IN: Able for total Remote Control via MIDI Channel.
(5) MAIN CONNECTOR/FUSE HOLDER/VOLTAGE SELECTOR: Before you connect the unit, please
make sure that the displayed voltage corresponds to your Mains supply, Please note that the AC voltage
selection is defined by the position of the Fuse Holder. If you intend to change the two markers monitors
the selected voltage, Please note that, depending on the mains voltage supplied to the unit, the correct fuse
type and rate must be installed (see 5.1 Technical Specifications). Please use the enclosed main cable to
connect the unit to the mains power supply.
3. MIDI Control
Able to transmit & receive REAL TIME transmission data through MIDI connection.
MIDI IN
Any MIDI data sent to the DS202 (sequencer, MIDI footswitch, etc) are received via the MIDI IN jack.
For example, when you wish to use the DS202 as an effects devices for our guitar rack, you can connect
the MIDI IN jack to a MIDI footswitch that allows for selecting program presets. If your rack includes ano
-ther MIDI effects devices (e.g. a multi-effects processor), the data sent from the MIDI footswitch can be
routed via the DS202 MIDI THRU jack to your multi-effects processor.
MIDI THRU
The MIDI THRU jack is used to loop through incoming MIDI data; i.e. any control received at the MIDI
IN of the DS202 can be transmitted via MIDI THRU jack to other MIDI devices or instruments.
MIDI OUT
The MIDI OUT jack allows for transmitting MIDI data that originate from the DS202.
4
THRU
IN
IN: REPLACE WITH SAME TYPE FUSE AND RATING
ATTENTION: RISK OF ELECTRIC SHOCK
DO NOT OPEN THE COVER OR BACK
CHINA:
160-250VAC T100mA
DIGISYNTHETIC PLUS MODEL DSP PDAC
CONCEIVED AND DESIGNED BY DIGISYNTHETIC CHINA
MIDI
Fig 2.1 : DS202 REAR PANEL
ALL INPUTS & OUTPUTS
FULLY BALANCED
INPUT LEVEL
+
TIP/PIN2
20dB
RING/PIN3 -
SLEEVE/PIN1
SERIAL NUMBER
DATE CODE
OUTPUTS 2
3
1
INPUT LEVEL
+4dB
20dB
+4dB
2
1
3
INPUTS 2
OUTPUTS 2
2
2
1
3
INPUTS 1
Page 6