Fibercommand ULTRAVISION Problemen oplossen - Pagina 2

Blader online of download pdf Problemen oplossen voor {categorie_naam} Fibercommand ULTRAVISION. Fibercommand ULTRAVISION 5 pagina's.

1) Disconnect the HDMI PLUG marked " SOURCE" from the main cable

2) Leave the HDMI "SOURCE" PLUG connected to your HDMI source, powered on (in play)

Use your phone to take a picture of the fiber optic lights on the aqua-colored plug of the

HDMI source ( see picture here below ).

To take the picture please zoom-in your phone camera and move the Aqua-Color

connector so you can see the lights properly.

If the HDMI SOURCE IS ON, and the plug is properly working you should see

In this example we use a MURIDEO as HDMI SOURCE, you can use your set top box, or

AV-RECEIVER, or PS5, or DVD player, or Blueray Player, or any standard TV HDMI source

for this test avoid to use special sources such as splitters/switchers/computers.

4) If you can see the 5 lights SKIP TO STEP #8

5) If you CANNOT see the 5 lights at all, or you see Less than 5 lights, try connecting the

auxiliary USB Power cord from the HDMI SOURCE plug as some HDMI video sources

does not provide HDMI 5 Volts power. This USB aux power is usually not required on

the HDMI SOURCE plug side and can stay disconnected, unless the source has no

5volts power or does not provide enough power to run 4K120 / 8K60 in which case

5 LIGHTS .