Sharp 21E-FG1S Bedieningshandleiding - Pagina 9

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp 21E-FG1S. Sharp 21E-FG1S 30 pagina's.
Ook voor Sharp 21E-FG1S: Bedieningshandleiding (29 pagina's)

Pagina afdrukken
Sharp 21E-FG1S Bedieningshandleiding
TV Set
POWER
Behind the door
1
4
7
LANGUAGE
21E-FG1S_07-11E
Downloaded from:
http://www.usersmanualguide.com/

Watching TV

Watching a TV programme

Simple operations for watching a TV programme
1
2
Power indicator
CH
CH
TV/VIDEO
1
2
3
5
6
5
8
9
0
CH
CH
CH
CH
MENU
3
SURROUND
NORMAL
TV
• When the power indicator lights up dimly, either
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator lights up dimly, the TV is in Standby mode and power is still supplied to the
TV. If you will not watch TV for a while, turn off the main power by pressing
if you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or COMPONENT), AV2 input channels cannot be selected using
remote control. Use
TV/VIDEO
• Channels that have been skipped cannot be selected. See
• The on-screen displays in this manual may differ from their actual appearance.
8
2 1 E - F G 1 S _ 0 7 - 11 E
Turn on power.
• When the power indicator is off, press
• When the power indicator lights up dimly, press
control. The power indicator changes to bright and a picture appears.
Select channel.
With
/
CH
CH
• Press
and channels change as shown below.
CH
1 / 2 / ... / 98 / 99 / AV1 (or COMPONENT) / AV2 / 0 / 1 / 2 ...
• Press
and channels change as shown below.
CH
1 / 0 / AV2 / AV1 (or COMPONENT) / 99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
If "5-" is indicated, press
press
again.
5
• To select a two-digit channel, such as 15, press
the two-digit input. Press
Adjust volume using
.
• The number of oval blocks " "
indicates the volume level.
The volume bar disappears
approximately three seconds after
the volume has been adjusted.
/
CH
to select these channel.
F L E ( M ) S d n . B h d
.
POWER
on the remote
.
5
to select one-digit input, and then
, and then press
1
5
/
VOLUME
on the TV can be pressed to turn on
CH
on the TV set. Also,
POWER
/
CH
CH
16
.
29/12/04, 9:24 am
D i m e n s i o n : 1 7 6 x 2 5 0 m m
to select
.
--
1-
15
PAL
B/G
10
on the
E 8