Sharp 92L2390137W010 Bedieningshandleiding - Pagina 23

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp 92L2390137W010. Sharp 92L2390137W010 28 pagina's.

„ Recording from the radio
1
Tune in to the desired station. (See page 17.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE
(
)
button.
Recording will be paused.
4
Press the
/
button on the
main unit or the TAPE 2
button
on the remote control to start re-
cording.
To interrupt recording:
Press the REC PAUSE
(
) button.
To resume recording, press the
/
(TAPE 2
To stop recording:
Press the
(TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
z When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.
z To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.
„ Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal or CrO tapes.
1
2
3
4
) button.
5
To stop dubbing:
Side A
Press the
TAPE 1 and TAPE 2 will simultaneously stop.
„ Erasing recorded tapes
Tab for side A
Tab for side B
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
2
Press the TAPE (1
3 Press the REC PAUSE
4 Press the
control to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
Press the ON/STAND-BY button to turn the power on.
Load a prerecorded cassette into
the TAPE 1 cassette compart-
ment. Insert a blank tape into the
TAPE 2 cassette compartment.
It is recommended that the recording
tape is the same length as the master
tape.
Press the TAPE (1
2) button un-
til "TAPE 1" appears on the dis-
play.
Press the REC PAUSE
(
)
button.
Recording will be paused.
Press the
/
button on the
main unit or the TAPE 2
button
on the remote control to start
dubbing.
(TAPE ) button.
2) button until "TAPE 2" appears on the display.
(
) button.
/
button on the main unit or the TAPE 2
Listening to the radio (See page 17.)
01/8/28
CD-BK137W(X)E3.fm
CD-BK137W
button on the remote
ENGLISH
E-22