Sharp CD G14000 Bedieningshandleiding - Pagina 19
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD G14000. Sharp CD G14000 48 pagina's. Mini component system
Pagina afdrukken
Setting the clock (Remote Control only)
In this example, the clock is set for the 12-hour (AM 12:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
select "CLOCK", and press the MEMORY button.
4
Press the
or
display and then press the MEMORY button.
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
or
button to
button to select 12-hour or 24-hour
5
Press the
or
press the MEMORY button.
Press the
or
1 hour. Hold it down to advance continuously.
6
Press the
or
then press the MEMORY button.
Press the
or
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
time. The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
To change the 12-hour or 24-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 43 for details.]
2 Perform "Setting the clock" from step 1.
button to adjust the hour and then
button once to advance the time by
button to adjust the minutes and
button once to advance the time by
or
button to display the
CD-G14000
19