Sharp CD-80W Bedieningshandleiding - Pagina 24

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-80W. Sharp CD-80W 28 pagina's.

(Continued)

RESETTING THE MICROCOMPUTER

ON/

STAND-BY

ON/

STAND-BY

Headphones

Before plugging in or unplugging the headphones, make sure

the volume level is reduced.

Be sure your headphones have a 3.5 mm (1/8") diameter plug

and are between 16 ohms and 50 ohms impedance. The rec-

ommended impedance is 32 ohms.

When headphones are connected, the speakers are discon-

nected automatically. Adjust the VOLUME control for the

desired volume.

Reset the microcomputer under the following conditions:

X-BASS/

To erase all of the stored memory contents (clock and timer

DEMO

settings, and tuner and CD presets).

If the display is not correct.

If the operation is not correct.

Press the ON/STAND-BY button to enter the stand-by mode.

Whilst pressing down the

button, hold down the ON/STAND-BY button for at least 1

second.

"CLEAR AL" will appear.

Caution:

The operation explained above will erase all data stored in

memory including clock and timer settings, and tuner and CD

presets.

Before you move this product to a new location, proceed

OPEN/

as follows:

Press the ON/STAND-BY button to turn the power on.

Press the CD button.

Press the OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted in the unit.

Press the OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the stand-by mode,

and then unplug the AC power lead from the AC socket.

E-23

button and the X-BASS/DEMO