Sharp CD-80W Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-80W. Sharp CD-80W 28 pagina's.

Pagina afdrukken

PRECAUTIONS

General

Please ensure that the equipment is positioned in a well

ventilated area and ensure that there is at least 10 cm

(4") of free space along the sides, top and back of the

equipment.

Do not use oil, solvents, petrol, paint thinners or insec-

ticides on the unit.

Do not expose the unit to moisture, to temperatures higher

than 60˚C (140˚F) or to extreme low temperatures.

Keep the unit away from direct sunlight, strong magnetic

fields, excessive dust, humidity and electronic/electrical

equipment (home computers, facsimiles, etc.) which gener-

ates electrical noise.

Hold the AC power plug by the head when removing it

from the AC socket, as pulling the lead can damage in-

ternal wires.

When cleaning the heads, pinch rollers, etc, remove the

AC power plug from the wall socket as the unit contains

high voltages.

Do not remove the outer cover, as this may result in elec-

tric shock. Refer internal service to your local SHARP ser-

vice facility.

Use the unit on a firm, level surface free from vibration,

and do not place anything on the top of the unit.

If the unit does not work properly whilst in use, disconnect

the AC power lead from the AC socket. Plug the AC power

lead back in, and then press the ON/STAND-BY button to

turn the power on.

If an electrical storm is taking place near you, it is sug-

gested that you disconnect the AC power lead from the

AC socket for safety.

The ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers,

tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should

be placed on the apparatus.

Attention should be drawn to the environmental aspects

of battery disposal.

Warning:

The voltage used must be the same as that specified on this

unit. Using this product with a higher voltage other than which

is specified is dangerous and may result in a fire or other

type of accident causing damage. SHARP will not be held

responsible for any damage resulting from use of this unit

with a voltage other than that which is specified.

Volume control

The sound level at a given volume setting depends on a

combination of speaker efficiency, location and various other

factors.

It is advisable to avoid exposure to high volume levels, which

occur whilst turning the unit on with the volume control setting

up high, or whilst continually listening at high volumes.

Condensation

Sudden temperature changes, storage or operation in an ex-

tremely humid environment may cause condensation inside

the cabinet (CD pickup, tape heads, etc.) or on the transmit-

ter LED on the remote control.

Condensation can cause the unit to malfunction.

If this happens, leave the power on with no disc (or cassette)

in the unit until normal playback is possible (about 1 hour).

Wipe off any condensation on the transmitter LED with a soft

cloth before operating the unit.

Care of compact discs

Compact discs are fairly resistant to damage, however mis-

tracking can occur due to an accumulation of dirt on the disc

surface.

Follow the guidelines below for maximum enjoyment from

your CD collection and player.

Do not write on either side of the disc, particularly the

non-label side. Signals are read from the non-label side.

Do not mark this surface.

Keep your discs away from direct sunlight, heat, and ex-

cessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or

water on the CDs can cause noise or mistracking. If a CD

is dirty or does not play properly, clean it with a soft, dry

cloth, wiping straight out from the centre, along the radius.

Cassette tape

For playback, use normal or low-noise tape for the best

sound. (Metal or CrO

For recording, use only normal tape.

Do not use C-120 tapes, tapes with large diameter reels,

or poor-quality tapes, as they may cause malfunctions.

Before loading a tape into the cassette compartment,

tighten the slack with a pen or pencil.

Cassettes have removable tabs which prevent accidental

recording or erasing from taking place. Removing the tab

will protect the corresponding side from being erased.

Cover the tab holes with adhesive tape to erase or record

again.

TAPE 1: Playback only.

TAPE 2: Playback or record.

Tab for side B (2)

E-3

YES

Correct

tape is not recommended.)

Side A (1)

Tab for side A (1)