Sharp CD-ES111H Bedieningshandleiding - Pagina 34
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-ES111H. Sharp CD-ES111H 37 pagina's. Mini component system
Ook voor Sharp CD-ES111H: Snelstarthandleiding (2 pagina's), Bedieningshandleiding (37 pagina's), Snelstarthandleiding (2 pagina's)
Pagina afdrukken
CD-ES111H
ENGLISH
E-27
Downloaded From DvDPlayer-Manual.com Sharp Manuals
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
TAPE 1
D
TAPE 2
Playback head
Erase head
Capstan
Recording/Playback head
Pinch roller
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser's instructions care-
fully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
B
A
C
Power source
Power
consumption
Dimensions
B
E
C
Weight
Amplifier
Output power
Output terminals
Input terminals
03/10/29
CD-ES111H(H)E.fm
AC 230 V, 50 Hz
34 W
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
5.5 kg (12.1 lbs.)
PMPO: 60 W
MPO: 30 W (15 W + 15 W) (DIN 45 324)
RMS: 20 W (10 W + 10 W) (DIN 45 324)
RMS: 14 W (7 W + 7 W) (DIN 45 500)
Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
TINSZA004SJZZ