Sharp CD-ES600V Bedieningshandleiding - Pagina 38

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-ES600V. Sharp CD-ES600V 48 pagina's. Video cd mini system
Ook voor Sharp CD-ES600V: Servicehandleiding (20 pagina's), Servicehandleiding (4 pagina's)

Pagina afdrukken

Recording on a cassette tape (continued)

CD-ES600V

ENGLISH

! Recording from the radio

Tune in to the desired station (see page 29).

Load a cassette into the TAPE 2 cassette compartment

with side A facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button to choose one side or both sides.

... To record on both sides.

... To record on only one

side.

Press the

button.

Recording will be paused.

Press the

(

SELECT/RESUME) button to record on

side A, or the

[

(TAPE-2)] button for side B.

To record on both sides, begin with side A. (If recording is start-

ed from side B, the tape will not switch over to side A.)

To interrupt recording:

Press the

button.

To resume recording, press the same recording button you pressed

in step 5. Other buttons do not allow resuming.

To stop recording:

Press the

( /RETURN) button.

Note:

If you hear a whistling noise whilst recording an AM station, move

the AM loop aerial.

E-37

! Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.

Press the ON/STAND-BY button to turn the power on.

Load a prerecorded cassette into the TAPE 1 cassette com-

partment. Insert a blank tape into the TAPE 2 cassette com-

partment.

It is recommended that the recording tape is the same length as

the master tape.

Press the TAPE (1

2) button

until "TAPE 1" appears on the

display.

The reverse mode will be set to " ".

Press the

button.

Recording will be paused.

Press the

(

SELECT/RESUME) button to start dub-

bing.

To stop dubbing:

Press the

( /RETURN) button.

TAPE 1 and TAPE 2 will simultaneously stop.

! Erasing recorded tapes

1 Load the tape to be erased into the TAPE 2 cassette compart-

ment with the side to be erased facing toward you.

2 Press the TAPE (1

2) button until "TAPE 2" appears on the dis-

play.

3 Set the

button to " " to erase only one side and to " " to

erase both sides.

4 Press the

button.

5 Press the

(

SELECT/RESUME) button to erase side A,

or the

[

(TAPE-2)] button to erase side B.

To erase both sides, begin with side A. (If erasing is started from

side B, the tape will not switch over to side A.)

Note:

Make sure that the TAPE 1 is not in use.

04/2/23

CD-ES600V(Z)E4.fm

TINSZA060AWZZ