Sharp CD-ES900 Bedieningshandleiding - Pagina 15

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-ES900. Sharp CD-ES900 36 pagina's. Sharp operation manual mini component system cd-es900 cp-es900
Ook voor Sharp CD-ES900: Bedieningshandleiding (36 pagina's)

Pagina afdrukken

Setting the clock

In this example, the clock is set for the 12-hour (AM 12:00) display.

Press the ON/STAND-BY button to turn the power on.

Press the CLOCK/TIMER button.

Within 10 seconds, press the

lect "CLOCK", and press the MEMORY/SET button.

Press the

hour display and then press the MEMORY/SET button.

"AM 12:00"

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

"AM 0:00"

The 12-hour display will appear.

(AM 0:00 - PM 11:59)

"0:00"

The 24-hour display will appear.

(0:00 - 23:59)

button to se-

button to select 12-hour or 24-

Press the

press the MEMORY/SET button.

Press the

button once to advance the time by 1

hour. Hold it down to advance continuously.

Press the

then press the MEMORY/SET button.

Press the

button once to advance the time by 1

minute. Hold it down to change the time in 5-minute intervals.

To confirm the time display:

[When the unit is in the stand-by mode]

Press the CLOCK/TIMER button.

The time display will appear for about 10 seconds.

[When the power is on]

Press the CLOCK/TIMER button.

Within 10 seconds, press the

The time display will appear for about 10 seconds.

Note:

The "CLOCK" will appear or time will flash to confirm the time dis-

play when the AC power supply is restored after a power failure or

unplugging the unit. If incorrect, readjust the clock as follows.

To readjust the clock:

Perform "Setting the clock" from step 1. If the "CLOCK" is not

appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-

play) will be skipped.

To change the 12-hour or 24-hour display:

Clear all the programmed contents. [Refer to "Clearing all the

memory (reset)" on page 33 for details.]

Perform "Setting the clock" from step 1.

Note:

The clock can also be set with the remote control.

button to adjust the hour and then

button to adjust the minutes and

button to display the time.

CD-ES900

CD-ES99