Sharp CD-MPS900 Bedieningshandleiding - Pagina 11

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-MPS900. Sharp CD-MPS900 42 pagina's. Sharp mini component system operation manual cd-mps900, cd-mps99

Pagina afdrukken

! Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS terminal and

position the FM antenna wire in the direction where the strongest

signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM LOOP jack. Position the

AM loop antenna for optimum reception. Place the AM loop antenna

on a shelf, etc., or attach it to a stand or a wall with screws (not sup-

plied).

Note:

Placing the antenna on the unit or near the AC power cord may

cause noise pickup. Place the antenna away from the unit for better

reception.

Installing the AM loop antenna:

< Assembling >

! Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to

the plus (+) terminal.

Caution:

" Use speakers with an impedance of 6 ohms or more, as lower im-

" Do not mistake the right and the left chan-

" Do not let the bare speaker wires touch

" Do not stand or sit on the speakers. You may

! Placing the speaker system

The left and right speakers have individual shapes. For best perfor-

mance, place the speakers according to the diagram below.

< Attaching to the wall >

Wall

Screws (not supplied)

Note:

The speaker grilles are not removable.

pedance speakers can damage the unit.

nels. The right speaker is the one on the right

side when you face the unit.

each other.

be injured.

Left speaker

CD-MPS99

CD-MPS900

Red

Black

Incorrect

Right speaker