Sharp CD-SW340H Bedieningshandleiding - Pagina 25

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp CD-SW340H. Sharp CD-SW340H 48 pagina's. Mini component system
Ook voor Sharp CD-SW340H: Snelstarthandleiding (2 pagina's)

Sharp CD-SW340H Bedieningshandleiding

Listening to the radio

5
4
3
2
1
ON/ STAND-BY
TIMER
CD
TUNER
(BAND)
PLAYBACK (PLAY & STOP)
TUNING
AUDIO
PHONES
IN
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,AUDIO IN).
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
5
4
3
2
1
RECORD/PLAYBACK
TUNING
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
or
to tune in to the desired station.
Manual tuning:
Press the TUNING (
or
to tune in to the desired station.
Auto tuning:
When the TUNING (
or
0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations "ASPM", see
page 32.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and "ST"
indicator will be displayed.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to
monaural, and the sound becomes clearer.
FM stereo mode indicator
) button on the remote control
) button as many times as required
) button is pressed for more than
or
) button again.
FM stereo receiving indicator
CD-SW340H
25