Sharp XL-S10 Bedieningshandleiding - Pagina 21

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp XL-S10. Sharp XL-S10 31 pagina's. Sharp deck operation manual xl-s10
Ook voor Sharp XL-S10: Servicehandleiding (44 pagina's)

Pagina afdrukken

Recording to a cassette tape

Before recording:

! When recording important selections, make a preliminary test to

ensure that the desired material is properly recorded.

! SHARP is not liable for damage or loss of your recording arising

from malfunction of this unit.

! The volume and sound controls can be adjusted with no effect on

the recorded signal (Variable Sound Monitor).

! For recording, use only normal tapes. Do not use metal or

CrO tapes.

" Recording from a CD

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button until "Cd dISC" appears on the

display.

When operating with the remote control, press the CD button.

Load the desired disc.

Load a cassette into the cassette compartment with the

side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button.

Press the

button, which also en-

gages the

button.

Press the

button again to cancel the pause mode.

Press the

( ) button for CD.

To perform programmed recording:

1 Program tracks (see page 17).

2 Press the

button.

3 Press the

button, which also engages the

4 Press the

button again to cancel the pause mode.

5 Press the

( ) button for CD.

To interrupt recording:

Press the

button.

To resume recording, press the

To stop recording:

Press the

button.

The tape will stop.

button.

XL-S10