Sharp AR-5320 Servicehandleiding - Pagina 11

Blader online of download pdf Servicehandleiding voor {categorie_naam} Sharp AR-5320. Sharp AR-5320 20 pagina's. Mono laser copier/printer
Ook voor Sharp AR-5320: Software-instelhandleiding (16 pagina's), Brochure & specificaties (4 pagina's)

Pagina afdrukken

Main

Sub

Contents

code

Resist amount adjustment

SPF scan position change-over

setting

Self print

Used to adjust the contact pressure of the machine resist roller and the RSPF resist roller onto the

paper.

(Operating procedure)

When this simulation is executed, the current set value is displayed.

When the exposure mode key is pressed, the following set items are changed sequentially. Enter an

adjustment value with the 10-key and press the [START] key, and the entered value will be saved and

a copy will be made. (Adjustment range: 1 ~ 99, Default: 50)

When the [CA] key is pressed, the entered value is saved and the simulation is terminated.

Lighting lamp

AE, Main cassette lamp

AE, 2nd cassette lamp

AE, Manual paper feed lamp

AE, TEXT, PHOTO lamps

Supported for the installed models only. Skipped for the models without installation.

Used to change over the scan position depending on that the SPF unit and the SPF document glass

holder section are of anti-dirt glass or not.

When this simulation is executed, the currently set code number is displayed.

Enter the code number corresponding to the SPF unit to be used and press [START] key, and the

setting will be changed over.

Code No.

Set to the scan position of the current mass production SPF unit. (Default)

Set to the scan position of the ant-dirt SPF unit.

Though this setting is changed, the other set values are not affected. (The other set values remain

unchanged.)

When replacing and installing the SPF unit, it is recommendable to use this simulation to set the

scan position and execute the scan position automatic adjustment.

The optical system status is ignored and a self print is made. Also when a print command is sent

from the host, printing is performed.

(Operating procedure)

When this simulation is executed, warm-up is performed and the ready lamp is lighted.

(However, the scanner is invalid and no initial operation is made.)

Enter the code number with the 10-key, and select a cassette with the cassette select key and press

the [START] key. The selected cassette start paper feed and printing is performed in the selected

pattern.

Only the tray lamp and the online lamp are lighted, and no other lamps are lighted.

Printing is made in 1 by 2 mode, where one line is printed and the following two liens are not printed,

or in the grid pattern.

Code number

Input disable for 4 ~ 99

Print data are made on A3 size. (A3 paper is preferable.)

AR-5316/5320 SIMULATIONS 7-5

Details of operation

Adjustment mode

Main cassette paper feed

2nd cassette paper feed

Manual paper feed

SPF document feed (Front surface)

Mode

Pattern

1 by 2

Grid pattern

White paper

Black background