Sharp AR-BC320 Installatie stuurprogramma - Pagina 8

Blader online of download pdf Installatie stuurprogramma voor {categorie_naam} Sharp AR-BC320. Sharp AR-BC320 28 pagina's. Digital full colour multifunctional system

Pagina afdrukken

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

I I I I Set the IP address of the machine

Before installing the printer driver, set the IP address of the machine using the appropriate key operator

program. For this procedure, see Key Operator Programs (page 6-6) in the "Operation manual (for printer)" (in

PDF format) in the "Software CD-ROM". The factory default setting for the IP address is "DHCP", which means

that the IP address is set automatically.

If you are not using the machine in a DHCP environment, ask your network administrator for the IP address,

Subnet mask, and Default gateway to be used for the machine, and then input this information into the key

operator program.

NOTE

If DHCP is used, the IP address assigned to the machine may be changed automatically on occasion. If this

happens, printing will not be possible.

To use DHCP on this machine, please configure a DHCP reservation. Or, if you make fixed IP address setting, the

problem will be resolved.

I I I I Installing the printer driver (standard installation)

The procedure for a standard installation of the printer driver is explained below. This procedure is normally

used when the printer driver will be used with a network connection.

To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protocol" must be installed on your

computer. If this is not installed, install as explained in Windows NT 4.0 Help.

NOTE

When installing the printer driver, if you wish to install a display font or specify the IP address of the machine by

direct entry, select [Custom installation]. (page 8)

Insert

the

"Software

accompanied the machine into your CD-

ROM drive.

Click

the

[start]

Computer], and then double-click the CD-

ROM icon.

In Windows 95/98/Me/NT 4.0/2000, double-click

[My Computer], and then double-click the CD-

ROM icon.

Double-click the [SETUP] icon.

The Licence Agreement window will

appear. Make sure that you understand

the contents of the licence agreement, and

then click the [Yes] button.

After confirming the message in the

"Welcome" window, click the [Next]

button.

CD-ROM"

that

button,

click

[My

Click the [Printer Driver] button.

To view detailed information on the software, click

the [Display Readme] button.

G If you wish to install the printer status monitor or the

Scanner driver, click the [Utility Software] button in

this window and then click the [Printer Status

Monitor] or [Scanner Driver] button and follow the

on-screen instructions.

If you installed the scanner driver, read the

separate supplementary manual after completing

installation.

G If you wish to install the printer administration

utility, click the [Administrator Tools] button in this

window and then click the [Printer Administration

Utility] button and follow the on-screen instructions.

Click the [Next] button.