Sharp AR-C262M Key Installatie stuurprogramma - Pagina 21
Blader online of download pdf Installatie stuurprogramma voor {categorie_naam} Sharp AR-C262M Key. Sharp AR-C262M Key 28 pagina's. Digital full colour multifunctional system
Ook voor Sharp AR-C262M Key: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
INSTALLING
TWAIN DRIVER
The procedures for installing and using the TWAIN driver are explained below.
NOTE
G The TWAIN driver can only be used on a network port. It cannot be used on a parallel port or USB port. For
information on network environments, see page 5.
G To use the TWAIN driver in a Windows NT 4.0 environment, you must have administrator rights.
G There are two methods for installing the TWAIN driver: installation using the integrated installer as explained in
this manual, and installation by specifying the INF file (for the WIA/STI driver) from the operating system. If you
will be using the TWAIN driver, it is recommended that you install it using the integrated installer. A driver
installed by specifying the INF file and a driver installed with the integrated installer cannot coexist.
If a driver that was installed by specifying the INF file already exists, delete it before installing the TWAIN driver
with the integrated installer.
Before installation
Check the following before installing the TWAIN driver:
• Make sure that your computer system meets the requirements below.
Computer type:
IBM PC/AT or compatible computer
Hardware requirements of the operating system
must be satisfied.
Installing the TWAIN driver
The procedure for installing the TWAIN driver is explained below.
1
Insert
the
"Software
accompanied the machine into your CD-
ROM drive.
2
Click
the
[start]
Computer], and then double-click the CD-
ROM icon.
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer], and then double-click the CD-
ROM icon.
Double-click the [SETUP] icon.
3
4
The Licence Agreement window will
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
5
After confirming the message in the
"Welcome" window, click the [Next]
button.
AND
CD-ROM"
that
button,
click
[My
USING
Operating system:
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows Me
Microsoft Windows 2000 Server/Professional
Microsoft Windows NT 4.0 (Service Pack 3 or later)
Microsoft Windows XP Professional/Home Edition
Microsoft Windows Server 2003
(Cannot be used on Windows NT 4.0 Terminal Server.)
6
Click the [Utility Software] button.
To view detailed information on the software, click
the [Display Readme] button.
G If you wish to install the printer driver, see
"INSTALLING THE PRINTER DRIVER AND
UTILITIES (SOFTWARE INSTALLATION)" on
pages 4 through 16.
G If you wish to install the printer administration
utility, click the [Administrator Tools] button in this
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
THE
19