Sharp AR-C360P Software-installatiehandleiding
Blader online of download pdf Software-installatiehandleiding voor {categorie_naam} Sharp AR-C360P. Sharp AR-C360P 29 pagina's. Sharp ar-c360p: supplementary guide
Ook voor Sharp AR-C360P: Handleiding voor afdrukken (46 pagina's)
![Sharp AR-C360P Software-installatiehandleiding](/uploads/products/server2/5048399/5048399.png)
Table of Contents
Network Installation................................... 2
Windows ................................................2
Novell ....................................................7
®
Installation ............................... 8
USB Connection ......................................8
Parallel Connection ................................ 11
®
Installation ............................ 13
OS 9.2 or above .................................... 14
OS 10.2.4 or above ............................... 16
Service and Support ................................. 18
Sharp AR-C360P
Software Installation Guide
About this Guide
This guide describes the initial printer driver
installation. For more detailed information, refer to
the EFI User Software Installation Guide and EFI
Configuration Guide provided on the User
Documentation CD (CD3).
The general steps for installing the software are as
follows:
• Install the PostScript printer driver or PCL
printer driver and corresponding printer driver
files.
• Set up the printer driver to communicate with
the Fiery.
• Install Fiery utilities and user software.
Configure Fiery utilities and user software
You must also configure either a local connection
for printing directly to your printer or a network
connection for printing over a network.
A full set of user documentation, where
procedures are described in detail, is provided on
the User Documentation CD (CD3).
1
NOTE