Sharp M160D Bedieningshandleiding - Pagina 23

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp M160D. Sharp M160D 32 pagina's. Digital multifunctional system manual for printer and scanner

Pagina afdrukken

SCAN

BUTTON MANAGER SETTINGS

If you need to configure Button Manager settings, follow the steps below. For details on Button Manager settings,

see Button Manager Help.

Right-click the Button Manager icon

(

) on the task bar and select

[Settings] from the pop-up menu.

The Button Manager settings will open.

If the Button Manager icon does not appear on

Note

the task bar, click the [start] button, select [All

Programs] ([Programs] in Windows 2000),

select [Sharp Button Manager W], and then

click [Button Manager] to start Button

Manager. The Button Manager icon appears

on the task bar.

Click the tab that you wish to

configure.

Set up the start-up application in the

"Application Selection" area.

• If the [Show TWAIN setting screen when

Note

scanning] checkbox is selected, the

setting screen will appear when scanning

is executed to let you adjust the scanning

conditions.

• If an application other than [FAX] is

selected, you can select the "File format"

of the scanned image. If [PDF] is selected

for the file format, the image quality may

be slightly degraded.

(page 21)

Select scanning conditions such as

"Color Mode" and "Scanning Side" in

the "Scan Setup" area.

• If you placed a two-sided original in the RSPF,

select [Duplex-Book] or [Duplex-Tablet] as

appropriate for the position of the binding on

the original.

• The name of the tab can be changed. Click the

[Menu Name] button and enter a new name.

After entering a name, click the [Apply] button

or [OK] button. This also changes the scan

destination name that appears on the machine.

(Example: SC1: XXXXX)

• If you selected [Duplex-Book] or

Note

[Duplex-Tablet] from the "Scanning Side"

menu, select "Right edge is fed first" or

"Top edge is fed first" for the orientation of

the original.

• For original sizes for which two-sided

scanning is possible, see "REVERSING

SINGLE PASS FEEDER / SINGLE PASS

FEEDER" in "3. PERIPHERAL DEVICES

AND SUPPLIES" in the "Operation

manual (for general information and

copier)".

• Some settings cannot be selected in

some applications.

• When [Show TWAIN setting screen when

scanning] is selected, only [Menu name]

can be selected.

Click the [OK] button.

This completes the settings.