Sharp MX 5500N - Color Laser - Copier Handleiding voor probleemoplossing - Pagina 14
Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Sharp MX 5500N - Color Laser - Copier. Sharp MX 5500N - Color Laser - Copier 48 pagina's. Digital full colour multifunctional system
Ook voor Sharp MX 5500N - Color Laser - Copier: Brochure & specificaties (12 pagina's), Gebruiksaanwijzing (14 pagina's), Handmatig (49 pagina's), Veiligheidshandboek (28 pagina's)
Pagina afdrukken
Problem
Printing does not take
place.
12
Point to check
Is the IP address selected correctly?
(Windows)
Is AppleTalk active?
(Macintosh)
Is "Connect via" set to [Ethernet] for
AppleTalk?
(Mac OS 9.0-9.2.2)
Is your computer in an unstable state?
Is the machine specified correctly in the
software application that you are using
for printing?
Are the network connection devices
operating normally?
Is the I/O timeout setting too short?
Solution
If the machine does not have a permanent IP address
(the machine receives an IP address from a DHCP
server), printing will not be possible if the IP address
changes. Print the "All Custom Setting List" in the
system settings and check the IP address of the
machine. If the IP address has changed, change the
port setting in the printer driver.
➞ System Settings > "List Print (User)" > "All Custom
Setting List"
☞
Software Setup Guide
If the IP address changes frequently, it is recommended
that a permanent IP address be assigned to the machine.
➞ System Settings (Administrator) > "Network Settings"
In Mac OS X, click [Network] in [System Preferences]
and select "Built-in Ethernet" in "Show". Click the
[AppleTalk] tab and make sure that [Make AppleTalk
Active] is selected.
In Mac OS 9.0 to 9.2.2, open the [Chooser] from the
Apple menu and make sure that [Active] is selected.
Printing is not possible if [Active] is not selected.
Ask your administrator to check if "Enable EtherTalk" is
enabled in the system settings (administrator). (The
factory default setting is "Enable".)
➞ System Settings (Administrator) > "Network Settings"
> "Enable EtherTalk" >
Open [AppleTalk] from the [Control Panels] and make
sure that [Ethernet] is selected in the "Connect via"
menu. Printing is not possible if [Ethernet] is not selected.
Printing is sometimes not possible when you run
multiple applications at once or there is insufficient
memory or hard drive space. Restart your computer.
Make sure that the printer driver of the machine is
selected in the Print window of the application.
If the printer driver does not appear in the list of
available printer drivers, it may not be installed correctly.
Remove the printer driver and then install it once again.
☞
INSTALLATION (page 31)
Make sure that the routers and other network
connection devices are operating correctly. If a device is
not powered on or is in an error state, see the manual of
the device to correct the problem.
If the I/O timeout setting is too short, errors may occur
while writing to the printer. Ask the administrator of the
machine to configure an appropriate time in "I/O Timeout".
➞ System Settings (Administrator) > "Printer Settings" >
"Interface Settings" > "I/O Timeout"