Sharp MX-2300N Guide Software-instelhandleiding - Pagina 45

Blader online of download pdf Software-instelhandleiding voor {categorie_naam} Sharp MX-2300N Guide. Sharp MX-2300N Guide 48 pagina's. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Ook voor Sharp MX-2300N Guide: Specificaties (2 pagina's), Handleiding voor probleemoplossing (44 pagina's), Veiligheidshandboek (28 pagina's), Handleiding voor het indienen van documenten (47 pagina's), Instructies voor scannen naar e-mail (7 pagina's)

Select [SC2 TCP/IP Port] and then click

the [New Port] button.

In Windows 98/Me, select [Other], [SC2 TCP/IP Port],

and then click the [OK] button.

• The "SC2 TCP/IP Port" is added when the printer

driver is installed using a "Standard installation", or

a "Custom installation" with "LPR Direct Print"

selected.

• If the printer driver is installed using a "Custom

installation" with "IPP" selected, the [SC-Print2005

Port] is added. If you need to change the printer port

when the machine is connected to an intranet or a

wide area network (WAN) using the IPP function,

select [SC-Print2005 Port], click the [New Port]

button (the [OK] button in Windows 98/Me), and

follow the on-screen instructions to create the port

again.

CHECKING THE IP ADDRESS OF THE MACHINE

You can check the IP address of the machine by printing out the "All Custom Setting List" in the system settings. Follow

these steps to print out the "All Custom Setting List".

Press the [SYSTEM SETTINGS] key, touch the [List Print (User)] key, and then touch the [All Custom Setting List] key.

Create the new port.

(1) (2)

(3)

(1) Enter the machine's IP address.

(2) Make sure that [LPR] is selected.

(3) Make sure that [lp] is entered.

(4) Click the [OK] button.

Click the [Close] button in the screen of

step 4.

In Windows 98/Me, this step is not required. Go to the

next step.

Make sure the created printer port is

selected in the printer properties

window and then click the [Apply]

button.

CHANGING THE PORT

(4)