Sharp MX-M503N Veiligheidshandboek - Pagina 7

Blader online of download pdf Veiligheidshandboek voor {categorie_naam} Sharp MX-M503N. Sharp MX-M503N 32 pagina's. Sharp digital multifunctional system
Ook voor Sharp MX-M503N: Software-instelhandleiding (48 pagina's), Onderdelen (37 pagina's)

Pagina afdrukken

INSTALLATION REQUIREMENTS

The performance of the machine is affected by the ambient conditions of the installation location. Do not install in the

following locations:

CAUTION:

Do not install the machine in a location

with poor air circulation.

A small amount of ozone is created inside the machine during

printing. The amount of ozone created is not sufficient to be

harmful; however, an unpleasant odor may be noticed during

large copy runs, and thus the machine should be installed in a

room with a ventilation fan or windows that provide sufficient

air circulation. (The odor may occasionally cause headaches.)

* Install the machine so that people are not directly

exposed to exhaust from the machine. If installed near a

window, ensure that the machine is not exposed to direct

sunlight.

Locations that are excessively hot, cold,

humid, or dry (near heaters, humidifiers, air

conditioners, etc.)

The paper will become damp and condensation may form

inside the machine, causing misfeeds and dirty output.

☞

Ambient environment (page 9)

If the location has an ultrasonic humidifier, use pure water for

humidifiers in the humidifier. If tap water is used, minerals

and other impurities will be emitted, causing impurities to

collect on the inside of the machine and create dirty output.

Near a wall

Be sure to allow the required space around the machine for

servicing and proper ventilation. (The machine should be no

closer than the distances indicated below from walls. The

indicated distances are for the case when a saddle finisher

and large capacity paper tray are not installed.)

11-13/16"

(30cm)

The machine includes a built-in hard drive. Do not subject the machine to shock or vibration. In particular, never

move the machine while the power is on.

• The machine should be installed near an accessible power outlet for easy connection.

• Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the

same outlet, the light may flicker.

11-13/16"

(30cm)

17-23/32"

(45cm)

Dusty locations

If dust enters the machine, dirty output and machine failure

may result.

Locations exposed to direct sunlight

Plastic parts may become deformed and dirty output may

result.

Locations with ammonia gas

Installing the machine next to a diazo copy machine may

cause dirty output.

Locations subject to vibration.

Vibration may cause failure.