Sharp PN-L802B Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Sharp PN-L802B. Sharp PN-L802B 13 pagina's. Touchscreen
Ook voor Sharp PN-L802B: Bedieningshandleiding (9 pagina's), Bedieningshandleiding (48 pagina's), Installatiehandleiding (28 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (28 pagina's), Snelstarthandleiding (1 pagina's), Handleiding starten (24 pagina's), Garantie (2 pagina's), Software-instelhandleiding (46 pagina's), Aansluithandleiding (1 pagina's), Brochure & specificaties (4 pagina's)

Installation

Rear Connector Layout (con't)

1. Power Connection (refer to the Rear Connector Layout on pg. 8)

Use only the AC power adapter supplied with the system.

Input: 100~240V AC 1.3A

Output: 12V DC 7A

Plug the 12V AC/DC adapter (as in the figure 1 above) to the PN-

TPC2W7A's power input jack (as in the figure 2).

2. Power Button

This button will stay lit if the PN-TPC2W7A is powered on. If the

PN-TPC2W7A doesn't power up after the AC is connected, then

press this button to power up. If normal Windows shutdown is

not shutting down the PN-TPC2W7A, then press this button for

more than 4 seconds will turn off the PN-TPC2W7A. In this case,

run Disk Cleanup in Windows next time the PN-TPC2W7A is

powered up.