Sharp PN-L802B Handleiding starten - Pagina 8

Blader online of download pdf Handleiding starten voor {categorie_naam} Sharp PN-L802B. Sharp PN-L802B 24 pagina's. Touchscreen
Ook voor Sharp PN-L802B: Bedieningshandleiding (9 pagina's), Bedieningshandleiding (48 pagina's), Installatiehandleiding (28 pagina's), Gebruikershandleiding (13 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (1 pagina's), Snelstarthandleiding (28 pagina's), Snelstarthandleiding (1 pagina's), Garantie (2 pagina's), Software-instelhandleiding (46 pagina's), Aansluithandleiding (1 pagina's), Brochure & specificaties (4 pagina's)

Pagina afdrukken

Do not look directly at the light source.

Doing so may damage your eyes.

Do not block the ventilation ports on the machine. Do not install the machine in a location that

will block the ventilation ports.

Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.

The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer

be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.

With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.

Laser information

Wave length

790 nm ± 10 nm

Normal paper mode (P/S = 104 mm/s) = (5.15 µs ± 0.03 ns) / 7 mm

Pulse times

Heavy paper mode (P/S = 70 mm/s) = (3.83 µs ± 0.03 ns) / 7 mm

Output power

Max 0.405 mW

Caution

Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition

2-2007)

SAFETY PRECAUTIONS

This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10

and 1040.11 of the CDRH standards. This means that the equipment does not

produce hazardous laser radiation. For your safety, observe the precautions

below.

• Do not remove the cabinet, operation panel or any other covers.

• The equipment's exterior covers contain several safety interlock switches. Do

CAUTION

The fusing unit and paper exit area are hot. When removing a misfeed,

do not touch the fusing unit and paper exit area. Take care not to burn

yourself.

When loading paper, removing a misfeed, performing

maintenance, closing the front and side covers, and inserting

and removing trays, take care that your fingers are not

pinched.

not bypass any safety interlock by inserting wedges or other items into switch

slots.