Sharp SJ-X281E Bedieningshandleiding - Pagina 11

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Sharp SJ-X281E. Sharp SJ-X281E 16 pagina's.

Pagina afdrukken

Installation

1
Keep adequate ventilation space around the
refrigerator.
The picture shows the minimum required space for
installing the refrigerator. The measurement condition
space dimension.
60mm
or more
Rear clearance
The space between the rear of the refrigerator and the
wall should be 50mm or more, and less than 75mm. If
the space is wider than 75mm, you may get injured by
touching compressor and its peripheral parts which are
extremely hot during the operation.
Note
‡ By keeping greater space, the refrigerator may consume
a less amount of power consumption.
‡ If use the refrigerator in the smaller space dimension
loud noise and failure.
‡ Do not push the refrigerator against the wall. The wall
surrounding the refrigerator may get dirty or discolored
Overall space required in use
SJ-X201E
SJ-X316E
SJ-X251E
SJ-X346E
SJ-X281E
a
980mm
1090mm
b
1113mm
1215mm
a
90mm
or more
60mm
or more
2
Adjustable
foot
( SJ-X251E/X281E/X316E/X346E )
Note
‡ Place your refrigerator to access the plug.
‡ Keep your refrigerator out of direct sunlight and do not
place next to heat generating appliance.
‡ Do not place your refrigerator directly on the ground.
Insert suitable stand such as wooden board under the
refrigerator.
Before using your refrigerator
Clean the inside parts with a cloth soaked in warm water.
Free standing type
11