Shimano BR-M6000 Dealerhandleiding - Pagina 36
Blader online of download pdf Dealerhandleiding voor {categorie_naam} Shimano BR-M6000. Shimano BR-M6000 39 pagina's. Hydraulic disc brake
Ook voor Shimano BR-M6000: Dealerhandleiding (39 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake pads
Replacing the brake pads
This brake system is designed to automatically adjust the clearance between the disc brake rotor and the brake pads by the piston gradually protruding according to
the wear of the brake pads; therefore, when you replace the brake pads, you need to push back the piston.
If oil adheres to the brake pads, if the brake pads are worn down to a thickness of 0.5mm, or if the brake pad presser springs are interfering with the disc brake rotor,
replace the brake pads.
The illustration uses BR-M7000 as an example to explain.
(A)
1
For split pin
1
2
Clean the pistons and surrounding area.
To be continued on next page
NOTE
TECH TIPS
Remove the wheel from the frame, and
remove the brake pads as shown in the
illustration.
(B)
(A)
36
(A)
Brake pad
(B)
Snap ring
(A)
Split pin