Shimano BR-M965 Servicehandleiding - Pagina 36

Blader online of download pdf Servicehandleiding voor {categorie_naam} Shimano BR-M965. Shimano BR-M965 41 pagina's. Disc brake systems

Pagina afdrukken

< SM-BH62 >

1. At brake lever end

Pass the hose through the connecting bolt and the

olive as shown in the illustration.

Direction of insertion

Connecting bolt

Hose

(sold separately)

Cover (sold separately)

Attach the cover to

the connecting bolt

for the brake lever.

In order to check that the end of the hose is fitted

securely into the base of the hose mount of the

brake lever, make a mark on the hose beforehand

as shown in the illustration. (As a guide, the length

of hose inside the mount should be approximately

14 mm, measured from the cut end of the hose.)

Mark

Approx. 14 mm

Use an object such as a needle to smooth the inside

of the cut end of the hose, and then install the

connector insert. Attach the hose to the TL-BH61 as

shown in the illustration, and secure the TL-BH61 in

a vise. Then use a hammer or similar tool to knock

the connector insert in firmly until the base of the

connector insert touches the end of the hose. If the

end of the hose is not touching the base of the

connector insert, the hose may become

disconnected or fluid leaks may occur.

Hose

Connector

insert

Cut end

Apply grease to

the outside of

the olive.

Olive

Grease

Mark

Connector insert

Hose

4mm

Olive

TL-BH61

Vise

After checking that the olive is positioned as

shown in the illustration, apply grease to the

threads of the connecting bolts and then attach

the hose to the brake lever as shown in the

illustration.

5mm

Olive

Hose

While pushing the brake hose,

tighten the connecting bolt.

Tightening torque:

5 - 7 N·m {44 - 60 in. lbs.}

At caliper end

Check that the O-rings are positioned in the grooves

at both the top and bottom of the banjo, and then

secure the banjo to the calipers as shown in the

illustration. Make sure that the O-rings do not

protrude from the grooves at this time.

The O-ring has grease applied.

Tightening torque:

5 - 7 N·m {44 - 60 in. lbs.}

Brake Lever

Olive

Connecting bolt

Connector insert

8 mm spanner

Connecting bolt

Hose

Banjo

O-rings