Shimano CJ-8S40 Technische service-instructie

Blader online of download pdf Technische service-instructie voor {categorie_naam} Shimano CJ-8S40. Shimano CJ-8S40 5 pagina's. Cassette joint

Shimano CJ-8S40 Technische service-instructie
General Safety Information
WARNING
– To avoid serious injuries:
Obtain and read the service instructions
carefully prior to installing the parts. Loose,
worn, or damaged parts may cause serious
injury to the rider.
We strongly recommend only using genuine
Shimano replacement parts.
Read these Technical Service Instructions
carefully, and keep them in a safe place for
later reference.
NOTE:
The CJ-8S40 cassette joint should only be
used with sprockets from 16T to 23T.
When lubricating the chain or the sprockets, be
careful not to get any oil on the rubber bellows
or the rubber cover of the cassette joint.
For maximum performance we highly
recommend Shimano lubricants and
maintenance products.
Parts are not guaranteed against natural wear
or deterioration resulting from normal use.
CJ-8S40
Cassette Joint
Technical Service Instructions
Installation of the cassette joint
Refer to the Service Instructions for the Inter-8 hub for
details on installation of the cassette joint to the hub and
installation of the non-turn washer.
Note:
Different types of left and right non-turn washers are
available for use with standard and reversed fork
ends. Use whichever non-turn washers are suitable.
Fork end
Standard
Reversed
Reversed
(full chain case)
7 R
The projecting parts should be on the fork end
side.
Install the non-turn washers so that the
projecting parts is securely in the fork end
grooves on either side of the hub axle.
SI-74Y0A
Non-turn washer
Mark / Color
Right
Left
5R / Yellow
5L / Brown
7R / Black
7L / Gray
6R / Silver
6L / White
5R / Yellow
5L / Brown
Mark
t
Size
20
38
= 0
= 0