Shimano CLARIS ST-R2000 Dealerhandleiding - Pagina 35
Blader online of download pdf Dealerhandleiding voor {categorie_naam} Shimano CLARIS ST-R2000. Shimano CLARIS ST-R2000 48 pagina's. Shifting lever
Pagina afdrukken
MAINTENANCE
Replacement and reassembly of the indicator unit
3
4
Replacement and reassembly of the indicator unit
Disassembly and assembly should only be carried out when removing or replacing the indicator unit.
Disassembly
1
To be continued on next page
Then remove the wire end hooking cap
and install the cable.
(z)
(A)
(B)
(z)
Install the wire end hooking cap by
turning it as shown in the illustration
until it stops.
(A)
Do not turn it any further than this
otherwise it may damage the thread on
the cap.
(B)
Operate the release lever to set the chain
on the smallest chainring/smallest
sprocket.
(A)
Screwdriver
NOTE
35
(A)
Inner cable
(B)
Wire end hooking cap
(A)
Wire end hooking cap
(B)
Screwdriver
(A)
Release lever
Release lever
Specifications
operation count
2-speed
1 or more times
3-speed
2 or more times
6-speed
5 or more times
7-speed
6 or more times
8-speed
7 or more times
9-speed
8 or more times