Shimano deore XT Technische service-instructie - Pagina 3
Blader online of download pdf Technische service-instructie voor {categorie_naam} Shimano deore XT. Shimano deore XT 9 pagina's. Front derailleur for triple
Ook voor Shimano deore XT: Servicehandleiding (2 pagina's)
Pagina afdrukken
Installation
The following tools are needed to assemble this product.
Usage location
Rotor installation ring
Brake lever fixing bolt
Caliper fixing bolt / Adapter fixing bolts
Brake pad fixing shaft
Brake hose fixing bolt
Reservoir tank cover
Cable supporter
Bleed nipple
I Wheel spoke lacing
Check that the spokes have been laced as shown in the illustration.
A radial assembly cannot be used.
Lace the spokes as shown in Figure 1 below for the left side of the front wheel
(the side where the rotor is installed), and the left and right sides of the rear
wheel, and as shown in Figure 2 below for the right side of the front wheel.
Rotating
Front left
direction of
wheel
I Installation of the rotor
(SM-RT77)
Tightening torque:
40 N·m {350 in. lbs.}
I Installation of the brake lever (ST-M765)
Secure the brake lever as shown in
the illustration.
Brake lever Tightening torque:
6 - 8 N·m {53 - 69 in. lbs.}
In the case of carbon handlebars, it may be
necessary to lower the tightening torque in
order to prevent damage to the handlebar.
Please consult the bicycle or handlebar manufacturer regarding the appropriate
level of tightening torque for carbon handlebars.
Tool
TL-LR15
Allen key 5 mm
Allen key 5 mm
Allen key 3 mm
8 mm wrench
Phillips screwdriver #1
Phillips screwdriver #2
Socket wrench 7 mm
Rear left Rear right
Front right
Fig. 1
Fig. 2
Rotor
installation ring
TL-LR15