Shimano STEPS E6000 Gebruikershandleiding - Pagina 35
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Shimano STEPS E6000. Shimano STEPS E6000 46 pagina's. Shimano steps e6000 battery and charger
Pagina afdrukken
5.3.1 Display panel
Battery button
5.3.1.1 Battery charge level
1. Briefly press the battery button in standby mode.
Display
Description
100%
5 LEDs light up
4 LEDs light up
50 %
3 LEDs light up
2 LEDs light up
0 %
1 LED lights up
0 %
1 LED flashes
*dependent on model
On the outside of the battery are a button
and a display panel with five LEDs. Three
LEDs show percentage values. The LEDs
light up when you press the battery button.
The number lighting up, and how, provides
information on the battery.
Battery charge level
100 – 84%
83 – 68 %
67 – 51 %
50 – 34 %
33 – 17 %
17 – 0 %
5.3.1.2 Capacity
Capacity indicates the quantity of electric charge that a
battery can deliver or store. It is specified in ampere hours
(Ah). Even when used properly, capacity diminishes over
time due to chemical reactions (ageing). So it reduces with
every charging cycle for example. A battery also ages slightly
when it is not used.
A charging cycle is the complete charging of a battery from 0
to 100% capacity. It follows that not every charging process
equates to a charging cycle. For example, a charge from 50
to 100% capacity is only half a charging cycle.
1. Press the battery button for five seconds. The maximum available
capacity (state of health) of the battery will be displayed.
Display
100%
< 50%
The battery may need to be replaced when fewer than 3
LEDs light up. Discuss how to proceed with your cycle dealer.
Original User Guide | Pedelec Shimano Steps E6000 Version 1
Description
Battery charge level
3 – 5 LEDs light up
The battery has a capacity
of over 50%.
0 – 2 LEDs light up
The capacity of the battery
is below 50%.
EN-35