Accutone A30 SIGMA Gebruikershandleiding & Installatiehandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding & Installatiehandleiding voor {categorie_naam} Accutone A30 SIGMA. Accutone A30 SIGMA 10 pagina's. Telephone amplifier

Pagina afdrukken

connection & preparations.

Hooking all the parts together!

A.2.1 Connect to Telephone

Note that all connections jacks are located at the bottom of the unit. Flip over

the amplifier, unplug the handset cord from your telephone base unit and

insert it to the Modular Jack for Telephone Handset (12). Then, use the

phone cord provided with RJ-11 modular plug at both ends to connect the

control unit to your telephone. Plug one end of the cord to your base unit (A)

and the other end to the Modular Jack for Input from Telephone Unit

(11) at the back of the unit.

A.2

connection & preparations.

A.2

A.2.2 Connect to Telephone Headset

One thing you will notice right away is that A30 Amplifier comes already

installed with a cable connected to the bottom of the amplifier, specifically to

the Modular Jack for Telephone Headset (15). The other end of the

cable is a Quick Disconnecting Cable (QD) plug, as illustrated below.

To connect to any Accutone telephone headset, disconnect the QD on your

headset, and connect the top half of your headset cable to the QD cable

extended from the amplifier. Please note that this quick disconnector is

specially designed for users who are always on the move, by allowing users

to quickly connect and disconnect to the device.

* For pairing the A30 amplifier with non-Accutone headset, you must unplug the entire cable from the

modular jack (15) and connect it with the telephone headset's standard modular jack. We do not

recommend such pairing, as not all telephone headsets match the standard A30 configuration.

part a. getting comfortable.

Hooking all the parts together!