Digital Check SB1000 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Digital Check SB1000. Digital Check SB1000 16 pagina's. Sb series
Ook voor Digital Check SB1000: Eenvoudige installatiehandleiding (1 pagina's)
Pagina afdrukken
Common Error Codes from the Scanner
-216
Misfeed (The document failed to enter the path on time).
Remove the document and re-insert it.
Check for bent or excessively curled leading edges and straighten as
needed.
If they continue to get -216 errors, this might indicate that;
o The entry drive rollers may be dirty
o Something may be lodged in the path
-220
Document Stopped in the path or did not exit on time
Eject the documents, to clear the error condition.
Check the leading edges and corners of the document and straighten as
needed.
A -220 error code where the document is stopping in the path repeatedly
could indicate debris, paper or a staple in the path. Check if the document's
leading edge looks OK or is catching on something.
The scanner may need to be cleaned.
-212
No Checks (There are no checks indicated in the entry pocket)
A scan cycle has been initiated, but there is not a document present. Re-insert
the document and try the feeding it again.
-125
No Scanner (The scanner was not found while attempting to initialize the
scanner)
Check the USB cable connections.
Try a different cable.
Try a different USB port.
Verify that the PC has the proper drivers and the scanner firmware file is
installed.
14
v061311