Digital Electronics PS371XA-SD16P Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Electronics PS371XA-SD16P. Digital Electronics PS371XA-SD16P 8 pagina's. Ssd unit

Pagina afdrukken

Installation

• Shock Danger! Be sure to unplug the

PS-A unit from its power supply prior to

installing the HDD/SSD unit.

• Since the HDD/SSD unit is a precision

instrument that has a low resistance to

shocks, be sure it is neither hit by nor

pressed strongly against another

object when installing it.

• Even when the PS-A unit's screen dis-

play disappears, the power might be

distributed inside (such as the

"Standby"status etc). Be sure to con-

firm that the power cable on the rear

side of the PS-A unit is OFF.

When attaching the HDD/SSD

to the PS-3710A

(1) Place the PS-A unit face down and

unscrew five (5) attachment screws.

(See diagram).

(2) Lift the PS-A unit's Rear Cover off of the

PS-A unit.

PS-A unit's Rear Cover

(3) Insert the HDD/SSD unit cable

connector completely into the IDE I/F.

Attach HDD/SSD unit using four (4)

attachment screws.

The torque should be 0.5 to 0.6 N·m.

(4) Replace the PS-A unit's Rear Cover and

reattach five (5) attachment screws.

The torque should be 0.5 to 0.6 N·m.

IDE I/F