Digital Electronics Corporation PL-3600T Series Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Electronics Corporation PL-3600T Series. Digital Electronics Corporation PL-3600T Series 19 pagina's.

Pagina afdrukken

(3) Unscrew the four attachment screws

located at the top and bottom of the

front module.

(4) Detach the control box from the front

module.

Installing the front module and the

control box

Install the control box to the front module

in the reverse order of the uninstallation

steps. The necessary torque is 0.5N•m to

0.6N•m in every step.

Wiring

• To avoid an electric shock, prior to con-

necting the PL unit's power cord terminals

to the power terminal block, confirm that

the PL unit's power supply is completely

turned OFF, via a breaker, or similar unit.

• Any other power level can damage

both the PL and the power supply.

• Since DC type has no power ON/OFF

switch, be sure to attach a breaker-

type switch to its power cord.

• When the FG terminal is connected, be

sure the wire is grounded.

Wiring the AC type power supply cable

• When the FG terminal is connected, be

sure the wire is grounded. Not

grounding the PL unit will result in

excessive noise. Use your country's

applicable standard for grounding.

Power Cord Specifications

Use copper conductors only.

Power Cord

Diameter

Conductor Type Simple or Stranded Wire

Conductor

Length

*1 If the Conductor's end (individual) wires are not

twisted correctly, the end wires may either short

against each other, or against an electrode.

Wiring

When connecting the power code, use the

following items when performing wiring.

(Items are made by Phoenix Contact.)

Recommended

Driver

Recommended

Pin Terminals

Recommended

Pin Terminal

Crimp Tool

• Accompanying power supply connector is

a CA7-ACCNL-01 of Pro-face or FKC2,5/

3-STF-5,08 of Phoenix Contact.

Connecting the Power Cord

(1) Confirm that the power is not supplied to

the PL unit.

0.75 to 2.5mm

(18 - 12 AWG)

10mm [0.39in]

SZS 0.6x3.5 (1205053)

AI 0.75-10GY(3201288)

AI 1-10RD (3200182)

AI 1.5-10BK (3200195)

AI 2.5-12BU (3200962)

CRIMPFOX ZA3

(1201882)