Digital Electronics Corporation PS365XA-HD40 Snelstarthandleiding - Pagina 6
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Digital Electronics Corporation PS365XA-HD40. Digital Electronics Corporation PS365XA-HD40 8 pagina's. Hard disk unit
Pagina afdrukkenWhen attaching the HDD to the PS-3651A
IDE I/F
When attaching the HDD to the PS-3710A
PS-A unit's Rear Cover
(1) Turn off the power switch of the PS-A
unit, remove the power cable. Put the
PS-A on the horizontal place while the
display side of it is downside.
(2) Unscrew the screws (3) of the IDE
cover and remove the IDE cover. Plug
the HDD unit cable connector in the
IDE's interface (Seen the figure on the
left).
(3)
Install the HDD unit like the left
figure, and fix it with the screws (4)
which are contained in your package.
The torque strength for the fixing
should be a range of 0.5 to 0.6 N•m.
(4) Place the IDE cover back and fix it
with the screws (3) of the IDE cover.
(1) Place the PS-A unit face down and
unscrew five (5) attachment screws.
(See diagram).
(2) Lift the PS-A unit's Rear Cover off of
the PS-A unit.
6