Bittel UNO Media HA9888(68)TSD-S Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bittel UNO Media HA9888(68)TSD-S. Bittel UNO Media HA9888(68)TSD-S 14 pagina's. Uno media series
Ook voor Bittel UNO Media HA9888(68)TSD-S: Gebruikershandleiding (12 pagina's)
Pagina afdrukken2. Install handset cord
Insert the attached corded handset cord one end into the jack of handset,
then insert the other end into the jack which on the back of base (marked 2
and 12 in below figure)
3. Install telephone cord
Insert the one end of the straight line cord into the jack labeled "TO TEL"
(marked 14 in below figure), then insert the other end of the line cord into a
telephone wall jack.
4. Install telephone cord
Insert the one end of the attached adaptor into the power jack (marked 17
in below figure), then insert the other end of the adaptor into a wall power
socket.
5. Install Power and Telephone cord (only for model 68 Media)
First please connect the T-Cable's power jack (Marked 1 in the below figure)
with the power adaptor. Then please connect the T-Cable's RJ11 (4 pin.
Marked 2 in the below figure) with the telephone line jack in the room. Finally
please connect the T-Cable's RJ11 port (6 pin. Marked 3 in the below figure) to
telephone set's "TO TEL" port, which is on the back of the phone.
_______________________________________________________________________
_STH Europe
r
Holder
Pape
Page 5 of 14
Port for holder
UNO 67 68 SERIES