Digital Equipment Prioris HX 6000 Installatiehandleiding - Pagina 17

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Equipment Prioris HX 6000. Digital Equipment Prioris HX 6000 17 pagina's.
Ook voor Digital Equipment Prioris HX 6000: Installatiehandleiding (16 pagina's)

Pagina afdrukken

Prioris HX 6000 Server Powergrade Kit

7. Move the video cable to the newly installed video card and reboot

your server.

Refer to Chapter 2, "Server Software and Utilities," in your computer System

Reference Guide for any additional information on running the SCU.

Troubleshooting

Using the Crisis Recovery Diskette if Necessary

The crisis recovery diskette may be used only if your computer's BIOS

fails or if a BIOS upgrade is unsuccessful.

When using the Crisis Recovery diskette, you must remove any video

option card and enable the onboard VGA.

1. Turn off the server and set SW1-2 (Figure 1) to ON (Recovery

mode).

2. Insert the Crisis Recovery diskette into drive A and reboot the

computer.

NOTE:

Normal (OFF) position after using the crisis recovery

diskette.

Bulletin Board Access

For future reference, you can access product information and software

updates using the Internet at:

http://www.windows.digital.com

http://www.windows.digital.com/~ftp/00-index.htp

You can also access software updates through Digital's Bulletin Board

Service (BBS) by calling in the United States 508-496-8800.

The BBS is not a source for technical support. For advice, please call

your local Digital Service Representative.

Remember to return switch SW1-2 to its